signals when using a VCM10000 converter module.
SRC mode (DIP switch 1 on, internal 20 k W pull-down to common)
V IN High Min = 1.25 VDC; V IN Low Max = 0.45 VDC
I IN Max = 5 mA; V IN Max = 28 VDC
Models: CUB7TCS1, CUB7TCR1, CUB7TCG1 For these models, the
unit will time when the CUB7 input is high.
SNK mode (DIP switch 1 off - DO NOT USE )
SRC mode (DIP switch 1 on, internal 20 k W pull-down to common)
V IN High Min = 1.25 VDC; V IN Low Max = 0.45 VDC
I IN Max = 5 mA; V IN Max = 28 VDC
4. HIGH VOLTAGE INPUT :
COUNTERS: CUB7CVS0, CUB7CVR0, and CUB7CVG0
The unit adds one count with voltage present
V IN Range = 50-250 VDC/VAC 50/60 Hz, 5 mA max
Isolation: 2500 VAC 1 min
TIMERS: CUB7TVS0, CUB7TVR0, and CUB7TVG0
Unit will time with voltage present
V IN Range = 50-250 VDC/VAC 50/60 Hz, 5 mA max
Isolation: 2500 VAC 1 min
5. RESET INPUT :
V IN Low Max = 1.5 VDC (internal pull-up to battery)
I IN Max = 20 μA
5 msec min (active low)
Note: Reset input is active low to clear display to zero
6. TIMER ACCURACY :
CUB7TV: 0.03% +100 msec per RUN terminal activation
CUB7TC low freq/snk setup: 0.03% +1 msec per RUN terminal activation
CUB7TC high freq/snk setup: 0.03% -1 msec per RUN terminal activation
7. ENVIRONMENTAL CONDITIONS :
Operating Temperature: 0 to 50 °C
Storage Temperature: -30 to 80 °C
Vibration according to IEC 68-2-6: Operational 5 to 500 Hz, in X, Y, Z
direction for 1.5 hours, 5 g.
Shock according to IEC 68-2-27: Operational 30 g, 11 msec in 3 directions.
Operating and Storage Humidity: 85% max. (non-condensing)
8. CONNECTIONS : 22 gauge wire; wire length minimum 10"
OPTIONAL TERMINAL BLOCKS : Wire clamping terminals
Wire Strip Length: 0.275" (7 mm)
Wire Gage: 24-16 AWG copper wire
9. CONSTRUCTION : High impact plastic case with clear viewing window.
The front panel meets NEMA 4X/IP65 requirements for outdoor use when
properly installed. Installation Category II, Pollution Degree 2. Panel gasket
and mounting clip are included.
O RDERING I NFORMATION
10. CERTIFICATIONS AND COMPLIANCES :
SAFETY
UL Listed, File # E179259, UL508
Type 4X Outdoor Enclosure rating (Face only), UL50
IEC 61010-1, EN 61010-1: Safety requirements for electrical equipment
for measurement, control, and laboratory use, Part 1.
IP65 Enclosure rating (Face only), IEC 529
ELECTROMAGNETIC COMPATIBILITY
Emissions and Immunity to EN 61326:2006: Electrical Equipment for
Measurement, Control and Laboratory use.
Immunity to Industrial Locations:
Electrostatic discharge EN 61000-4-2 Criterion A
4 kV contact discharge
8 kV air discharge
Electromagnetic RF fields EN 61000-4-3 Criterion A
10 V/m (80 MHz to 1 GHz)
3 V/m (1.4 GHz to 2 GHz)
1 V/m (2 GHz to 2.7 GHz)
Fast transients (burst) EN 61000-4-4 Criterion A
2 kV power
1 kV I/O signal
Surge EN 61000-4-5 Criterion A
power 1 kV L to L,
2 kV L to G
RF conducted interference EN 61000-4-6 Criterion A
3 Vrms
Power freq magnetic fields EN 61000-4-8 Criterion A
30 A/m
AC power EN 61000-4-11
Voltage dip Criterion A
0% during 1 cycle
40% during 10/12 cycle
70% during 25/30 cycle
Short interruptions Criterion B
0% during 250/300 cycles
Emissions:
Emissions EN 55011 Class B
Notes:
1. Criterion A: Normal operation within specified limits.
2. Criterion B: Temporary loss of performance from which the unit self-
recovers.
Refer to the EMC Installation Guidelines section of the bulletin for
additional information.
11. WEIGHT : 0.11 lbs. (0.05 Kg)
COUNTERS
TIMERS
CUB7
C
0
CUB7
T
0
C - LOW VOLTAGE
+28 VDC max
V - HIGH VOLTAGE
50-250 VAC/DC
S - REFLECTIVE
R - RED
G - GREEN
C - LOW VOLTAGE
+28 VDC max
V - HIGH VOLTAGE
50-250 VAC/DC
S - REFLECTIVE
R - RED
G - GREEN
0 - USE WITH LOW VOLTAGE TO
TIME WHEN INPUT IS LOW
USE WITH HIGH VOLTAGE TO
TIME WHEN INPUT IS HIGH
1 - VALID ONLY WITH LOW VOLTAGE (C)
USE WITH 28 VDC (SRC MODE) TO
TIME WHEN INPUT IS HIGH
Accessorie s Part Numbers
TYPE
Plug-in
Terminal Block
Enclosure *
Base Mount *
DESCRIPTION
3 Position Terminal Block
4 Position Terminal Block
5 Position Terminal Block
CUB7 Enclosure
CUB7 Base Mount
PART NUMBER
TB100003
TB100004
TB100005
ENC13000
BMK80000
USED WITH
CUB7CCS0, CUB7TCS0, CUB7TCS1
CUB7CCG0, CUB7TCG0, CUB7TCG1,
CUB7CCR0, CUB7TCR0, CUB7TCR1,
CUB7CVS0, CUB7TVS0
CUB7CVG0, CUB7TVG0, CUB7CVR0,
CUB7TVR0
See Wiring the Meter section to determine the terminal block needed.
* Enclosure and base mount will NOT function with plug-in terminal block option.
2
相关PDF资料
CMI01Y LED YELLOW T1 3/4 PC MNT
5680FX;5LC LED T1 DUAL X/AMBER RA PCB
CUB4L000 COUNTER, REFLECTIVE
5322F7 LED YELLOW T1 .25" HI RTANG ASSY
5381H7LC LED T1-3/4 YLW 583NM VERT ASSY
MDMU0110 COUNTER 6-DIG YEL BKLIT PCB MNT
CUB7CVS0 COUNTER 8-DIGIT HV REFLECTIVE
MDMU0020 COUNTER 6-DIG RED BKLIT PNL MNT
相关代理商/技术参数
CUB7CVS0 功能描述:COUNTER 8-DIGIT HV REFLECTIVE RoHS:是 类别:工业控制,仪表 >> 计数器 系列:CUB7 其它有关文件:Declaration of Conformity 标准包装:1 系列:99766 计数速率:25Hz 数字/字母数:5 输入类型:机电式脉冲 输出类型:- 电源电压:24V 显示器类型:十进制拨轮
CUB7P000 功能描述:COUNTER 8-DIGIT CONTACT REFLECTV RoHS:是 类别:工业控制,仪表 >> 计数器 系列:CUB7 其它有关文件:Declaration of Conformity 标准包装:1 系列:99766 计数速率:25Hz 数字/字母数:5 输入类型:机电式脉冲 输出类型:- 电源电压:24V 显示器类型:十进制拨轮
CUB7P010 功能描述:COUNTER 8-DIGIT CONTACT GREEN RoHS:是 类别:工业控制,仪表 >> 计数器 系列:CUB7 其它有关文件:Declaration of Conformity 标准包装:1 系列:99766 计数速率:25Hz 数字/字母数:5 输入类型:机电式脉冲 输出类型:- 电源电压:24V 显示器类型:十进制拨轮
CUB7P020 功能描述:COUNTER 8-DIGIT CONTACT RED RoHS:是 类别:工业控制,仪表 >> 计数器 系列:CUB7 其它有关文件:Declaration of Conformity 标准包装:1 系列:99766 计数速率:25Hz 数字/字母数:5 输入类型:机电式脉冲 输出类型:- 电源电压:24V 显示器类型:十进制拨轮
CUB7P100 功能描述:COUNTER 8-DIGIT VOLTAGE REFLECTV RoHS:是 类别:工业控制,仪表 >> 计数器 系列:CUB7 其它有关文件:Declaration of Conformity 标准包装:1 系列:99766 计数速率:25Hz 数字/字母数:5 输入类型:机电式脉冲 输出类型:- 电源电压:24V 显示器类型:十进制拨轮
CUB7P110 功能描述:COUNTER 8-DIGIT VOLTAGE GREEN RoHS:是 类别:工业控制,仪表 >> 计数器 系列:CUB7 其它有关文件:Declaration of Conformity 标准包装:1 系列:99766 计数速率:25Hz 数字/字母数:5 输入类型:机电式脉冲 输出类型:- 电源电压:24V 显示器类型:十进制拨轮
CUB7P120 功能描述:COUNTER 8-DIGIT VOLTAGE RED RoHS:是 类别:工业控制,仪表 >> 计数器 系列:CUB7 其它有关文件:Declaration of Conformity 标准包装:1 系列:99766 计数速率:25Hz 数字/字母数:5 输入类型:机电式脉冲 输出类型:- 电源电压:24V 显示器类型:十进制拨轮
CUB7P200 功能描述:HSPEED LOGIC INPUT CNTR POS RoHS:是 类别:工业控制,仪表 >> 计数器 系列:CUB7 其它有关文件:Declaration of Conformity 标准包装:1 系列:99766 计数速率:25Hz 数字/字母数:5 输入类型:机电式脉冲 输出类型:- 电源电压:24V 显示器类型:十进制拨轮